Dimensions: 
Outer Diameter: 6ft (183cm)
Inner Diameter: 5ft (152cm)
Height: 20″ (51cm)
Recommended Water Depth: 16″ (40cm)
Water capacity at 80% full: 248 gallons (940 litres)

Easy inflatable pool set-up. Triple strength heavy gauge PVC side walls. The liner is supported by an inflatable top ring. Simply select a level surface, inflate the top ring and the pool will rise as it is filled with water.

No sharp edges and a convenient drain plug for easy draining. The valve simply attaches to a garden hose so that the water can be drained away from the pool area. Very easy to take down to store for the winter season.

A variety of heating options are available from the simple to use 3KW Intex heater to the high quality Elecro stainless steel heaters. A cost-effective solar panel kit is also available. A filter pump will be required if a heater is to be used.

Don’t forget the chemical treatment kits and replacement cartridge filters, to extend the life of your inflatable pool water!

PLEASE NOTE: All filter pump units must be placed 2 metres away from the pool. We recommend that filtration is turned OFF when the pool is in operation. We recommend a smooth concrete slab as a suitable base- contact a reputable local builder for advice on local soil conditions. Failure to set up the pool on a flat, level compact ground could result in the pool’s collapse or the possibility that a person lounging in the pool could be swept out. Do not lean, straddle or exert pressure on the inflatable top ring or top rim as injury or flooding could occur. Do not sit on, climb or sraddle the sides of the pool.

WARRANTY: This product is covered by a manufacturer’s warranty. The liner is covered for 3 months and the electrical components for 1 year. There is no warranty on inflatable parts or accessories. In the event of a product failure a claim can only be made through the relevant warranty line. Please note that the manufacturer will only replace the faulty component.

Additional Information