The Axial® Wraith™ 1.9 4×4 is a new, 1/10 scale, ready-to-run platform that delivers it all – technical rock crawling prowess and detailed scale looks. Take the wheel and take command over mud, rocks, sand, and through any kind of backyard terrain!
At its foundation the Axial Wraith 1.9 4×4 is the first full tube frame chassis in RC, providing the durability you need for aggressive action on tough terrain. Refining the proven 2.2 Wraith chassis design, Axial improved the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling by helping the vehicle slip through and past obstacles.
Your battery mounts at the front of the chassis, for easy access and to provide the best weight distribution for aggressive climbing. For scale looks, Axial moved the servo off the top of the axle and onto the chassis – just as a full-size truck has its steering box located on the frame.
The Wraith 1.9 truck’s drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles. The pinion gear is 6mm above center, raising the ground clearance and improving driveshaft angles. Axial boosts the overall strength with metal gear construction; large, flex-reducing load bearings; increased gear surface contact; and a gear ratio that’s optimized to reduce torque twist.
Adjustable oil-filled, coil over shocks allow you to tune dampening for the best handling on any track. Moulded from durable S30 compound, the officially licensed Nitto Grappler tyres have a large block tread that gets excellent bite on a wide range of surfaces.
The Wraith 1.9 truck looks ready to climb mountains even when it’s standing still. At the front end of its polycarbonate body you’ll find a moulded plastic grille, radiator detail, and two large, LED-equipped headlights. Raise the hood and you’ll see a replica V8 engine tucked in front of the chassis battery mount. That V8 isn’t just for show. It’s also a rugged receiver box that guards the model’s Spektrum™ SRX200 receiver from water, dust, and debris.
The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery pack with IC3™ connector, compatible battery charger, and four AAs for the included Spektrum 2.4GHz transmitter. It’s easy enough for new RC hobbyists, with the design sophistication to take experienced drivers on incredible adventures far beyond the end of the road.
The foundation of the Wraith 1.9 platform is a refined, full-tube frame chassis – the first full tube frame in RC, with the durability you’ll need for aggressive action on, up and over the rocks. The chassis mounts your battery in front, allowing easy access and providing the perfect weight distribution for aggressive climbing.
Refining the successful 2.2 Wraith chassis design, Axial increases the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling on rough terrain by helping the vehicle slip through and past obstacles.
In pursuit of scale looks, Axial moves the servo off the top of the axle and onto the chassis – just as a full-size truck has its steering box located on the frame. The front suspension design also helps reduce bump steer as much as possible for the best driving experience.
The front end of the polycarbonate Wraith 1.9 body is highlighted by a moulded plastic grille featuring two large, 5mm lamps with factory-installed LEDs. Your vehicle’s realism keeps on shining after the sun goes down! Clear rectangular lenses cover two smaller, 3mm holes (LEDs for these are not included).
The Axial attention to scale realism is on display throughout the Wraith 1.9 RTR’s front end. Look closely into the front grille, for example, and you’ll notice additional moulded detail that reproduces an intricate honeycomb of (non-functional) radiator cooling fins.
Moulded inner fender wells help to reduce routine maintenance by keeping dirt and debris kicked up by the tyres from entering the chassis. Plus, they’re another example of Axial ingenuity: the wells double as part of the battery tray and feature simulated cooling vents for added realism.
Accessing the vehicle’s on-board electronics is as simple as pulling out two body clips and raising the hood. Inside and out, Axial finds clever ways to enhance the scale looks. For example, the waterproof receiver box does more than guard your sensitive electronics from potentially damaging off-road dust and debris. It also contributes to the thrilling scale realism by recreating the rocker arm covers and other contours of a V8 engine.
The STX2 2-channel radio system offers many features of higher-end 2.4GHz radio systems.
The SRX200 is a 2-channel 2.4GHz receiver that operates on the FHSS modulation. It’s conformal coated to help prevent damage from water, dust, and other elements, and also features an extra-long antenna lead for easy and effective antenna placement.
The included, water-resistant Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power. Dual ball bearings provide smooth, precise movement for the metal gear train.
Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan for extended periods of use. Just plug and go!
The Dynamite ESC is 3S LiPo capable, yet easily switched between LiPo and NiMH batteries with a simple jumper. No more complicated procedures!
The officially licensed Nitto Trail Grappler M/T Tyres offer fantastic off-road performance while still retaining excellent composure for on-road use. They’re moulded in durable S30 compound with large blocks that provide excellent bite when the going gets tough. 4.7″ x 1.9″ (119.4 x 48.2mm).
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are moulded in satin silver and feature stunning scale detailing on the front and a standard 12mm hex on the back.
KMC Wheels, Nitto® and Trail Grappler® are the property of their respective owners and are used with permission or under license by Horizon Hobby, LLC.
The ultra-compact, all metal gear transmission provides a wide range of gearing choices. The overall ratio can be adjusted using different pinion and spur gear choices, allowing super high speed or competition-level crawling.
The pinion gear is 6mm above center. This allows for added ground clearance and better driveshaft angles. The high pinion design has an increased surface contact for greater durability. The optimized gear ratio reduces torque twist at the axle which is typically seen with other small pumpkin axle designs. Metal gears are standard, as is a one piece all-metal locker front and rear. The smaller pinion is HD machine cut. Larger load bearings used around the gear set reduce flex and create a stronger drivetrain.
WB8 HD Wildboar front and rear driveshafts feature a large diameter cross pin (2x11mm) along with an M4 screw shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
The new adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).
In the box you’ll find two highly detailed turbochargers. Install them under the hood for added scale realism! (Two turbochargers included but not installed. Hardware for installation not included.)
Our dual slipper design uses a pad on each side of the spur gear to increase surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32-pitch gearing for high torque applications.
The suspension geometry uses a 4-link design for the rear which is optimized to reduce axle steer and torque twist. It also helps with steep off-camber climbs by having the proper amount of anti-squat and roll characteristics.
|Dimensions||50 × 25 × 25 cm|
If you would like your order changed after you have placed it then please contact us via email as soon as possible and we will do our best to meet your request. However, depending on when the item was packed then it may not always be possible to change an order. To find out the status of your order you can log in to your account area and if the order has not been packed or dispatched then we can change the order for you.
On every product page, you will find the delivery options available for that product. The options are as follows and will show delivery times for UK MAINLAND depending on which warehouse our stock is located in. You will be asked to make your selection in the checkout.
Standard (3-5 day delivery)
Expedited (order by 2pm for next day delivery)
Click and collect from our warehouse
|UK MAINLAND||COST||DELIVERY TIME||CARRIER|
|Standard UK delivery||FREE on orders over £50 | £5.10 on orders up to £49.99||Delivery within 3-5 working days||National Courier Signature Required & Trackable|
|Expedited UK delivery||£8.50||Delivery next working day subject to stock availability and order by 2pm||UK MAIL Signature Required & Trackable|
|Collect from our Warehouse||FREE||Collect in store same day (call us before you collect)||In person|
1.1 All goods are subject to availability.
1.2 Items ordered will be delivered as soon as possible in accordance with the requested delivery service. All delivery charges shown are for 2 to 4 day delivery of items in stock to U.K. mainland addresses only. If you require delivery to non-U.K. mainland address charges will vary depending upon the destination. Please contact us to discuss your requirements.
1.3 We will try to ensure that delivery is made within the estimated time scales.
1.4 For products listed on our Web Site outstanding orders can be cancelled at any time. In instances where payment has already been made, an alternative or refund in full for the item(s) concerned will be given.
1.5 You should check your order carefully when it is delivered to you. In the event of any goods delivered by us being damaged in transit, or failing to match the items ordered by you, then you should notify us promptly. We use independent couriers in order to deliver goods to you a quickly and efficiently as possible. We need to hear from you as soon as possible if you believe that your order has been damaged in transit so that we can investigate the matter with our couriers.
1.6 Any product with free delivery will only include the free service within mainland England. And the items will be sent by economy service and can take up to 7 working days.
Damaged on Delivery
In all cases we ask that you inspect your goods within 48 Hours of receipt, after this period we deem that you have accepted the goods, However should you inspect the goods and find there is damage you must report any damages to us by email immediately and within the 48 hour window from delivery. Please photograph the damage of the product in the box as you find it. Once you have found the item to be damaged, Do not continue to assemble your item, otherwise we will assume you have accepted it and may ask you to prove that you haven’t damaged the item, Once you spot any damage that means you would like to return the item simply repackage it into its original packaging with all accessories and follow the returns criteria below.
Order Cancellation: If you wish to cancel an item or order, you must inform us in writing before it is dispatched. You can do this preferably by email or phone. [email protected]
The United Kingdom’s Distance Selling Regulations provides you with a right to cancel your order at any time up to the end of the fourteenth working day following the day after the day on which you received your products. You do not need to give us any reason for cancellation. The goods should be unused: not previously assembled: in perfect condition for resale: returned in their original packaging and where possible any straps and security seals on the packaging should still be intact. You are liable for the cost and expense of returning the goods. We advise you to use an insured method of carriage as damaged boxes or product will not be accepted.
If you ask us to collect the item, we will deduct from any refund
Small item Upto 12KG – £8.95
Medium Item 12.1kg-30kg – £14.95
Large Item 30kg+ Pallet Service – Collection price is based on Postcode
Typically around £48.95 within a 100 mile radius of TF9 2DB over 100 mile can be up to £90.00 to the Highlands and Ireland. Any channel Island Collections are charged at £149.00
For certain products we are able to arrange collection from you at your cost, as an alternative to you returning the goods yourself- please contact us for details. Goods must not be returned to our premises- we will always inform you of the correct address to send to if you are organising the return yourself.
All products must be unopened in their original packaging.
Cancellation must be made within 14 days of receiving your order. Any costs incurred for collecting goods from your premises will be levied before the refund is made. Any costs incurred through product examination, testing and repackaging to make the goods re-saleable will also be offset before a refund is made. Cost of Return Carriage will not be refunded under any circumstance. We will however refund you any cost of shipping you paid to receive the item.
No cancellations can be offered on products that are made to order to the customer’s specification.
Cancellations by email must be sent to:
Faulty Goods: If the products purchased are faulty, and providing that we are informed in writing within a reasonable time (e.g. 7 days from receipt of the goods), then we will deliver faulty or missing parts, or if this is not possible then a like replacement to you as quickly as possible. If the goods are not available in a reasonable time then a full refund will be made. Faults resulting from misuse, neglect, accident, incorrect installation or normal wear and tear will not be covered.
In certain instances, a collection can be arranged and the cost of collection will be deducted from the refund amount as per the above scale of charges.- please contact us by email at [email protected] , quoting your sales order number should you wish for us to arrange the collection or call our offices on 01630 350050. Please note that goods can only be collected between 9am and 5pm Monday to Friday, and no timed slots are available from the couriers. Goods must not be returned to our premises- please check the correct address to return to if you are organising the return yourself. We recommend using Royal Mail First Class with certificate of posting, which covers goods up to the value of £55.
For heavier larger items we recommend
In all instances of returning items please photograph the item before you send it and the packaging so we can verify we receive it in the condition you send it, send it tracked and insured to it full value.
It may take up to 28 days to verify and process your claim once the goods have been collected from you. Due to banking laws all refunds must be credited to the original payment card used. If more than one item was ordered but a lesser quantity is returned due to faults then the original delivery charge is non-refundable.
Please note that different rules apply to Bestway and Intex products, and to inflatable products and ride-on toys: –
Bestway, Intex, Inflatable Toys/ Pools
In addition to your statutory rights the manufacturers offer the following guarantee. The liner is covered for 3 months and the electrical components for 1 year. There is no warranty on inflatable parts or accessories. In the event of a product failure a claim can only be made through the relevant warranty telephone line. Please note that the manufacturer will only replace the faulty component and no refunds are available. The warranty is only applicable to the UK and does not apply if the goods are taken abroad.
Radio Controlled & Ride-On Toys
Goods can be returned to us within a reasonable time of order for replacement. Returns will not be accepted without a valid return authorisation number (RMA NUMBER) please email photographs of the product, the packaging and a brief description of fault. Defective goods will be refunded should the original product be out of stock and we are unable to replace.
The returns number should be written on a piece of paper with your order confirmation / order number and placed in the box. Returning any product to any other address will not be our responsibility
Once returned and verified as being in the correct condition, a refund will be issued to you for the full price of the goods less any delivery, inspection, testing and inspection costs that we have incurred. Certain items such as mini motos and quad bikes will need to be inspected/tested to ensure safety for future use- typically the cost of this would be 25% of original purchase value. Any costs incurred for collecting goods from your premises will also be levied before the refund is made. A typical Pallet Collection is £45.00 upto £90 for Highlands and Ireland.
If the goods that are returned are not in a fully resalable condition then we reserve the right to refuse the refund, or at our absolute discretion we will deduct 25-50% from the original transaction value and then refund the remainder.
All motorbikes and quad-bikes, are dangerous. Please wear safety equipment at all times when using bikes or similar machines. The use of any powered vehicle could involve the risk of injury or death. Please use these products in a responsible manner.
The products that we supply are technical & mechanical products, which require mechanical knowledge and skill to use and maintain. You should not purchase this product unless you have a good understanding of how to use and maintain mechanical products.
None of the bikes we provide are ‘road legal’ and are not for use on the public highway. These bikes are intended to be enjoyed on private property. Use of these bikes on a public highway could result in criminal proceedings.
The Following parts are not covered by any warranty offered on this product:
– Chains & Belts;
– Fairings/ bodywork (24 hours after delivery- photos required)
– Pull Starts or Inner Cogs
– Clutches or springs
– Brake Callipers;
– Exhaust Pipes;
– Tyres, Wheels, valves and Inner Tubes;
– Spark Plugs;
Any other parts of a similar wear and tear nature to those listed above and any part that has been damaged as a result of accident damage or lack of maintenance.
If within any warranty period your machine develops a fault, you must contact us and we will:
Advise how to best rectify the problem and dispatch parts, without charge, during the first 7 days, providing the parts required are under warranty. Please note customers will be expected to fit parts themselves, guidance will be available on technical issues.
This product should not be used on public roads, and should not be used by minors under 14. It requires a small amount of home assembly. Instruction and a basic tool set will be provided, but a competent adult must carry this out. It will also require constant maintenance to ensure it is in safe working order. All bolts, nuts, cables, fixings, wheels, tyres, chain, sprockets etc MUST be checked before EACH ride to ensure that it is SAFE to Ride!
In certain instances, we can arrange to have a carrier collect the goods from your premises. If this is required then you should contact us by email at [email protected] or by quoting your sales receipt number. We will then obtain a quotation for you for the cost of the return and then contact you to arrange collection day and payment before collection is arranged. Please note that goods can only be collected between 8am and 7pm Monday to Friday and no timed deliveries are available.
It may take up to 28 days to verify and process your claim once the goods have been collected from you. Due to banking laws all refunds must be credited to the original payment card used.
No refunds can be offered on products that are made to order to the customer’s specification.
Statutory Rights: Please note that these terms do not affect your statutory rights. For more information you should contact your local Citizens Advice Bureau or Trading Standards Office.
Goods Not Received and Returned to Sender Due To No Contact, Or your refusal to accept the parcel after ordering.
We make every effort to make sure your delivery arrives with in a timely manner. To do this we rely on courier services and pallet couriers for heavier items. Pallet couriers are unable to deliver any goods to you without prior contact with the buyer. We ask you at checkout for the best number to contact you on and confirm this in your order confirmation. Should the couriers not be able to get hold of you to book in a large delivery ie a Quad Bike or Large Pool they may choose after storing the item for some days to return the goods to us, at an additional cost. In all circumstances this cost will be deducted from any refund amount. For Pallet Deliveries this will be delivery costs as explained above for the round trip.
For Example: A pallet delivery charge as in the above collection/delivery costs table x 2 for the sending and the returning. We will take the item back into stock and refund your payment method minus any return delivery charge and or storage charge and the original cost we incurred in sending the item out to you, As per the above collections rate prices above. This is also clarified in the Sales Of Goods Act 1979.37
All returns to be sent back to:
Ride On Toys